Powerfix Z31697A User Manual download pdf (Page 13)

13 GB

Measuring surface area

Note: In order to avoid errors in the measuring

method, please familiarize yourself ﬁrst with the

information about measuring lengths.

Press the ON/OFF button

to switch the

device on.

Press the MODE button

repeatedly until

the symbol for surface area measurement

„

“, as well as the designation 0.00 m

(or 0‘00“), appear in the display

. The

symbol „

“ for length measurement ﬂashes.

The device displays in this way, that it is

ready for the ﬁrst measurement.

Align the device and press the READ button

. If the measurement is successful, the

length will appear at the top of the display.

The symbol for width measurement „

“

also ﬂashes. The device displays in this way,

that it is ready for the measurement of the width.

Align the device and press the READ button

again. If the measurement is successful, the

width appears at the top of the display, and

at the bottom appears the surface area in the

unit of measurement (or sq.ft = square feet).

Press the MODE button brieﬂy, if a further

surface area measurement is required. The

ﬁgures in the display are reset, and the device

is ready for a new surface area measurement.

Measuring volume

Note: In order to avoid errors in the measuring

method, please familiarize yourself ﬁrst with the

information about measuring lengths.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 104 105

No comments

Powerfix Z31697A User Manual Page 13