Powerfix Z31697A User Manual download pdf (Page 10)

10 GB

used battery more easily with the aid of the

material strip, which is inside the battery

compartment. Just pull on the material strip.

Remove the used battery.

Plug the contacts of the 9 V block battery on

the contacts of the proﬁled plug. Make sure

you ﬁt the batteries the right way round. This

is speciﬁed by the proﬁled shape of the con-

tacts. Also ensure without fail that the material

strip is underneath the battery.

Insert the battery in the battery compartment

and close the cover again, so that it audibly

latches into place.

Start-up

Measuring length

Press the ON/OFF button

9

to switch the

device on. If you do not press any button for

60 s, the display

10

shuts down.

To switch the device oﬀ manually, hold the

ON/OFF button pressed down for 3 sec-

onds, until the display goes out and a double

tone signal sounds.

Press the MODE button

8

repeatedly, until

the display shows the symbol for length meas-

urement „

“ as well as the length designa-

tion 0.00m (or 0‘00“).

Hold the reference area

6

of the ultrasonic

rangeﬁnder at the start point of your meas-

urement. Hold the device in such a way, that

the reference area is aligned parallel to the

target area of the measurement.

If necessary use the level indicator

7

to

align the ultrasonic rangeﬁnder horizontally.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 104 105

Comments to this Manuals

No comments